INSTRUCTION FOR USE
RELIGHT - Universal light-curing Nano-hybride composite Material
COMPOSITION
Dimethacrylate oligomers (bis-GMA, TEGDMA, UDMA, bis-EMA, PEGDMA), combined filler from modified aluminosilicate glass (0.1–2.0 μm), nanosized particles of silicon oxide (5–20 nm), pigments
INDICATIONS
RELIGHT colour is designed for imitation of color effects (chalk stains, enamel cracks, etc.) and toning of composite restorations.
CONTRAINDICATIONS
Individual intolerance.
Apply carefully with patients allergic to methacrylates.
SIDE EFFECTS
As far as all terms of storing, transporting and application are observed, there are no other side effects.
METHOD OF USE
Attention! It is recommended to store material at room temperature (22–24) °C within 1–2 hours before use.
During layer by layer restoration of dental tissues with composite material, apply RELIGHT colour with brush or special tool, in the area between layers of composite material and cure under the light of 400–500 nm wavelength within 20–40 seconds.
If necessary, pigmented paste can be mixed with composite paste, avoiding formation of air pores in material.
Maximum thickness of RELIGHT colour layer should be more than 0.1 mm.
If use RELIGHT colour for covering pigmented tooth tissues, it is important to treat prepared surface with adhesive (complying with manufacturer’s instruction for use).
RELIGHT colour can be applied into the cavity, directly from syringe. To do so, take off the cap from syringe, fix an application cannula and insert material into prepared cavity. Attention! Reuse of application tip is forbidden!
Attention! Composite paste’s syringe cap should be closed immediately after use. Intense light contact with material at any stage of restoration might cause premature curing. During curing the waveguide endface should be kept in close proximity to curable material. Intensity of the light, emitted by a lamp for photopolymerization, should be regularly tested with the help of suitable photometers.
PRESENTATION
Paste LC (syringe) 1 g
STORAGE
Store at the temperature from 5 °C to 25 °C. Keep in dry place Tightly close container immediately after use
Do not use after expiry date
Shelf life — 3 years
Attention! Non-compliance with terms of storage, transportation or application leads to decrease of material life.
After opening of the package, guaranteed storing and service life of material is limited by an expiration date.
Reviews
There are no reviews yet.